ASSEMBLY
B2-87spec tableSpecial Service Tools (SST) (continued)
49 L012 005
NameSpacer (Part of 49 L012 0A0)
UsageFor installation of valve seals
49 0636 100B
NameArm, valve spring lifter
UsageFor removal / installation of valves
49 B012 0A2
NamePivot
UsageFor removal / installation of valves
49 B012 012
NameBody (Part of 49 B012 0A2)
UsageFor removal / installation of valves
49 B012 013
NameFoot (Part of 49 B012 0A2)
UsageFor removal / installation of valves
49 B012 014
NameLocknut (Part of 49 B012 0A2)
UsageFor removal / installation of valves
49 G014 001
NameWrench, oil filter
UsageFor removal / installation of oil filter
49 G019 017
NameInstaller, oil seal
UsageFor installation of rear oil seal
49 H010 401
NameInstaller, oil seal
UsageFor installation of front oil seal
49 F401 330B
NameInstaller set, bearing
UsageFor installation of camshaft oil seals
49 F401 331
NameBody (Part of 49 F401 330B)
UsageFor installation of camshaft oil seals
49 F401 337A
NameAttachment C (Part of 49 F401 330B)
UsageFor installation of camshaft oil seals
NOTE
1. Do not reuse gaskets or oil seals.
2. Clean all parts before reinstallation.
3. Apply clean engine oil to all sliding and rotating parts.
4. Replace plain bearings if they are peeled, burned, or otherwise damaged.
5. Tighten all bolts and nuts to the specified torque.