MX-3 Service ManualMX-3

Torque Specs Tools Parts Diagrams

ASSEMBLY — AUXILIARY PARTS

B2-112parts diagram

K8-ZE V6 engine auxiliary parts assembly. Units note: N·m {kgf·m, ft·lbf} unless otherwise stated.

Continued from B2-111

AUXILIARY PARTS — Torque Specifications

Parts DiagramFig. fig1

Parts diagram

#	Part Name	Notes
1	Spark plug wires / ignition	Tightening torque 15—22 N·m {1.5—2.3 kgf·m, 11—16 ft·lbf}
2	Intake manifold / bracket bolts	Tightening torque 19—25 N·m {1.9—2.6 kgf·m, 14—18 ft·lbf}
3	Intake manifold gasket	GASKET, NEW
4	Bracket / mount bolts	Tightening torque 38—51 N·m {3.8—5.3 kgf·m, 28—38 ft·lbf}
5	O-ring	O-RING, NEW; Tightening torque 7.9—10.7 N·m {80—110 kgf·cm, 70—95.4 in·lbf}
6	Gasket	GASKET, NEW
7	Alternator / bracket	Tightening torque 19—25 N·m {1.9—2.6 kgf·m, 14—18 ft·lbf} and 38—51 N·m {3.8—5.3 kgf·m, 28—38 ft·lbf}
8	Oil filter	OIL FILTER, NEW
9	Oil filter base / bracket	Tightening torque 38—51 N·m {3.8—5.3 kgf·m, 28—38 ft·lbf}

Oil Filter

1
Apply a small amount of clean engine oil to the rubber seal of the new oil filter.
49 G014 001
2
Install the filter and tighten it by hand until the rubber seal contacts the mounting base.
3
Tighten the filter 1-1/6 turns by using the SST.

Support our work!