Mazda MX-3 silhouetteMX-3

INSTALLATION

B2-117parts diagram

Separate torque diagrams for MTX (manual transaxle) and ATX (automatic transaxle). K8-ZE V6 engine. Units note: N·m {kgf·m, ft·lbf}.

Continued from B2-116

PROCEDURE

Tighten all bolts and nuts to the specified torques.

Step 1 — Torque Specifications

Tightening torque (MTX)engine-to-transaxle / starter bolts (multiple)
38 - 51N·m
Tightening torque (MTX)transaxle mounting bolts
68 - 99.0N·m
Tightening torque (ATX)ATX inset fastener
6.9 - 9.8N·m
Tightening torque (ATX)ATX bolts (multiple)
38 - 51N·m
Tightening torque (ATX)ATX transaxle mounting bolts
68 - 99N·m
Tightening torque (ATX)ATX engine mount
35 - 49N·m

Transaxle

  1. 1
    Join the engine and transaxle.
    Transaxle housing end view with arrows pointing to the bolt locations to be tightened when joining the engine and transaxle.
  2. 2
    Install the transaxle mounting bolts.
  3. 3
    Tighten the bolts shown.
transaxle mounting bolts
68 - 99.0N·m
Support our work!

Search Manual

Search pages, specs, and procedures