INSTALLATION
B2-126parts diagramTop-right inset is specific to ATX (automatic transaxle).
Step 6 Torque Specifications
| Specification | Value |
|---|---|
| upper left | 6.9 - 9.8N·m |
| upper crossmember | 7.9 - 10.7N·m |
| center | 7.9 - 10.7N·m |
| air cleaner H upper | 19 - 25N·m |
| air cleaner H lower | 19 - 25N·m |
| right | 6.9 - 9.8N·m |
| right | 2.4 - 5.9N·m |
| battery tray | 7.9 - 10.7N·m |
| lower left | 63 - 93N·m |
| lower left | 32 - 46N·m |
| lower left | 19 - 25N·m |
| lower left (bumper/underpanel) | 7.9 - 10.7N·m |
| lower center | 38 - 51N·m |
| bottom (reservoir) | 6.9 - 9.8N·m |
upper left
6.9 - 9.8N·m
upper crossmember
7.9 - 10.7N·m
center
7.9 - 10.7N·m
air cleaner H upper
19 - 25N·m
air cleaner H lower
19 - 25N·m
right
6.9 - 9.8N·m
right
2.4 - 5.9N·m
battery tray
7.9 - 10.7N·m
lower left
63 - 93N·m
lower left
32 - 46N·m
lower left
19 - 25N·m
lower left (bumper/underpanel)
7.9 - 10.7N·m
lower center
38 - 51N·m
bottom (reservoir)
6.9 - 9.8N·m
NOTE
ATX inset: replace the split pin (SPRIT PIN, NEW) at the transaxle shift cable; balloons B and C indicate the fastener locations.