ASSEMBLY — Cylinder Head Cover Bolt Tightening
B2-106prose procedureK8-ZE V6 — separate RH and LH cylinder head cover bolt sequences.
Cylinder Head Cover (continued)
- 4Install the cylinder head cover and tighten the bolts in two or three steps in the order shown.Tightening torque: 5.0—8.8 N·m {50—90 kgf·cm, 44—78 in·lbf}
- 5Retighten cylinder head cover bolts. RH 5 6 and LH 6 7Tightening torque: 5.0—8.8 N·m {50—90 kgf·cm, 44—78 in·lbf}
| Specification | Value |
|---|---|
| Cylinder head cover boltInstall (step 4) | 5.0 - 8.8N·m |
| Cylinder head cover bolt reRH bolts 5,6 and LH bolts 6,7 (step 5) | 5.0 - 8.8N·m |
Cylinder head cover boltInstall (step 4)
5.0 - 8.8N·m
Cylinder head cover bolt reRH bolts 5,6 and LH bolts 6,7 (step 5)
5.0 - 8.8N·m