Mazda MX-3 silhouetteMX-3

ENGINE STAND DISMOUNTING

B2-116prose procedure

RH (right) exhaust manifold and insulator. K8-ZE V6 engine. EGR pipe tightened separately.

Continued from B2-115

PROCEDURE

Engine Stand Dismounting

  1. 1
    Remove the engine from the SST (Engine stand).
  2. 2
    Remove the SST (Engine hanger) from the engine in the reverse order of installation. (Refer to page B2-53.)
  3. 3
    Install a new gasket and the right exhaust manifold (RH) together with the EGR pipe.
    Right (RH) exhaust manifold installed on the cylinder head together with the EGR pipe, showing a new gasket in place and the manifold mounting bolts.
  4. 4
    Tighten the EGR pipe.
  5. 5
    Install the right exhaust manifold insulator (RH).
    Right (RH) exhaust manifold insulator (heat shield) installed over the right exhaust manifold.
right exhaust manifold (RH) with EGR pipe
19 - 25N·m
EGR pipe
54 - 68N·m
right exhaust manifold insulator (RH)
7.9 - 10.7N·m
Support our work!

See also

page B2-53

Search Manual

Search pages, specs, and procedures