Mazda MX-3 silhouetteMX-3

REMOVAL — Removal Note: A/C compressor; Step 2 harness connectors

B2-46component photo

Step 2 connector layout corresponds to the K8-ZE V6 engine (VRIS solenoid valve, dual heated oxygen sensors).

Continued from B2-45

A/C compressor

A/C compressor removal

  1. 1
    Remove the A/C compressor with the hoses still connected.
    Line drawing of the A/C compressor with four arrows pointing to its mounting bolt locations (two top, two bottom). Shows the multi-groove pulley on the left.
  2. 2
    Position the compressor away from the engine and secure it with wire.

Step 2

Disconnect the harness connectors shown.
Support our work!

Search Manual

Search pages, specs, and procedures