Mazda MX-3 silhouetteMX-3

BLOWER UNIT - Disassembly / Assembly

G-41parts diagram

Air intake actuator comes in two variants: LOGIC TYPE and WIRE TYPE (both shown).

Continued from G-40

Disassembly / Assembly

  1. 1
    Disassemble in the order shown in the figure.
    Full-page exploded view of the blower unit disassembly. Balloon callouts: 1 = air intake actuator (logic type, shown top-left labelled LOGIC TYPE; an inset top-right labelled WIRE TYPE shows the wire-type variant), 2 = intake door link, 3 = blower relay, 4 = resistor (wiring harness/connectors at bottom), 5 = blower unit case, 6 = blower motor (squirrel-cage fan), 7 = intake door assembly. Letters A mark mating points of the case halves.
  2. 2
    Assemble in the reverse order of disassembly.
Parts DiagramFig. fig1
#Part NameNotes
1Air intake actuator (logic type)Inspection ... page G-42
2Intake door link—
3Blower relayInspection ... page G-42
4ResistorInspection ... page G-42
5Blower unit case—
6Blower motorInspection ... page G-42
7Intake door assembly—
Support our work!

See also

page G-42

Search Manual

Search pages, specs, and procedures