CHARGING SYSTEM - BATTERY
G-11prose procedureTerminal and cable
- 1Check the tightness of the terminals to ensure good electrical connections.
- 2Check for corroded or frayed battery cables.
- 3Check the rubber protector on the positive terminal for proper coverage.
- 4Clean the terminals if necessary, and coat them with grease.
Recharging
WARNING
Hydrogen gas is produced during normal battery operation. A battery-related explosion can cause serious injury. Keep all flames (including cigarettes), heat, and sparks away from the top and surrounding area of open battery cells.
CAUTION
To prevent damage to electrical components or the battery, turn all accessories off and stop the engine before performing maintenance or recharging the battery.
When disconnecting the battery, remove the negative cable first and install it last to prevent damage to electrical components or the battery.
Do not quick charge for over 30 minutes. It will damage the battery.
Charging rates
50D20L
Slow charge (A)4.0-5.0
Quick charge (A)25
55D23L
Slow charge (A)4.5-5.5
Quick charge (A)30
65D23L
Slow charge (A)4.5-5.5
Quick charge (A)30
Slow charging
It is not necessary to remove the vent caps to perform a slow charge.
Quick charging
Remove the battery from the vehicle and remove the vent caps to perform a quick charge. Place the battery in a pan of water to prevent it from overheating. The water level should come up about halfway on the battery. Keep water off of the top of the battery.