CHARGING SYSTEM - GENERATOR Removal / Installation (K8 DOHC)

G-13parts diagram

Generator removal/installation shown for K8 DOHC (V6) engine. Condenser fan is fitted only if A/C-equipped.

Parts DiagramFig. fig1

#	Part Name	Notes
1	Fresh-air duct	—
2	Radiator upper bracket	—
3	Condenser fan (if equipped)	—
4	Generator terminal B wire	Inspect for damage and corrosion
5	Connector	—
6	Splash shield	—
7	Belt tensioner	—
8	Drive belt	Inspection page G-18; Adjustment page G-19; Replacement section B2
9	Generator	Disassembly / Assembly page G-15; Inspection page G-16

Specification	Value
Condenser fan / fresh-air duct bolts	7.9-10.7N·m {80-110 kgf·cm, 70-95.4 in·lbf}
Belt tensioner bolt	32-46N·m {3.2-4.7 kgf·m, 24-33 ft·lbf}
Generator terminal B nut	19-25N·m {1.9-2.6 kgf·m, 14-18 ft·lbf}
Splash shield / lower bracket bolts	9.81-11.7N·m {100-120 kgf·cm, 86.9-104 in·lbf}

Condenser fan / fresh-air duct bolts

7.9-10.7N·m {80-110 kgf·cm, 70-95.4 in·lbf}

Belt tensioner bolt

32-46N·m {3.2-4.7 kgf·m, 24-33 ft·lbf}

Generator terminal B nut

19-25N·m {1.9-2.6 kgf·m, 14-18 ft·lbf}

Splash shield / lower bracket bolts

9.81-11.7N·m {100-120 kgf·cm, 86.9-104 in·lbf}

Search Manual