FLOWCHARTS — Flowchart No. 2: Blower motor does not operate with fan switch at specific position

G-15flowchart

TROUBLESHOOTING

Field	Value
Flowchart No.	2
Symptom	Blower motor does not operate with fan switch at specific position
Related components	Resistor, fan switch, wiring harness

Flowchart No.

Value2

Symptom

ValueBlower motor does not operate with fan switch at specific position

Related components

ValueResistor, fan switch, wiring harness

1
Turn the ignition switch to ON.
2
Verify that the fan switch is off.
3
Measure the voltage at the following terminal wires of the resistor connector.
B+: Battery positive voltage

Wire	Voltage	Action
(L/W)	B+	Measure voltage at (L) wire
(L/W)	Other	Replace resistor (Refer to page G-41)
(L)	B+	Measure voltage at (L/R) wire
(L)	Other	Replace resistor (Refer to page G-41)
(L/R)	B+	Measure voltage at (L/Y) wire
(L/R)	Other	Replace resistor (Refer to page G-41)
(L/Y)	B+	Go to Step 2
(L/Y)	Other	Replace resistor (Refer to page G-41)

(L/W)

VoltageB+

ActionMeasure voltage at (L) wire

(L/W)

VoltageOther

ActionReplace resistor (Refer to page G-41)

(L)

VoltageB+

ActionMeasure voltage at (L/R) wire

(L)

VoltageOther

ActionReplace resistor (Refer to page G-41)

(L/R)

VoltageB+

ActionMeasure voltage at (L/Y) wire

(L/R)

VoltageOther

ActionReplace resistor (Refer to page G-41)

(L/Y)

VoltageB+

ActionGo to Step 2

(L/Y)

VoltageOther

ActionReplace resistor (Refer to page G-41)