CONVENTIONAL BRAKE SYSTEM
P-10prose procedurePedal Play
Inspection
Pedal Play Inspection
- 1Depress the pedal a few times to eliminate the vacuum in the system.
- 2Gently depress the pedal by hand and check the free play (until resistance is felt).
| Specification | Value |
|---|---|
| Pedal play | 4-7mm {0.16-0.27 in} |
Pedal play
4-7mm {0.16-0.27 in}
Adjustment
- 1Loosen lock nut (D) and turn rod (C) to adjust the free play.
- 2Verify the pedal height and the brake light operation.
| Specification | Value |
|---|---|
| ≈235 - 333N·m |
235 - 333N·m
Pedal-To-Floor Clearance
Inspection
Verify that the distance from the floor panel to the center of the pedal pad is as specified when the pedal is depressed with a force of 588 N {60 kgf, 132 lbf}.
| Specification | Value |
|---|---|
| Pedal-to-floor clearancemin. | 70mm {2.76 in} |
Pedal-to-floor clearancemin.
70mm {2.76 in}
If the distance is less than specified, check for the following problems:
If distance is less than specified, check for
- 1Air in brake system
- 2Malfunction of automatic adjuster (Rear drum brakes)
- 3Worn shoes or pads