Mazda MX-3 silhouetteMX-3

SEAT — Disassembly note

S-80prose procedure

Disassembly note

Seat back trim

  1. 1
    Remove the hog rings from the lower part of the seat back trim.
    Illustration of the lower part of the seat back trim with arrows indicating hog ring locations along the bottom edge. An enlarged inset (oval) shows pliers spreading a hog ring labeled HOG RING.
  2. 2
    Pull the seat back trim away from the padding and remove the remaining hog rings.
    Front view of the seat back trim with hog ring positions marked across the frame. An enlarged inset shows pliers releasing a hog ring labeled HOG RING.
  3. 3
    Remove the pole guide by using pliers as shown in the figure.
    Hands using pliers to remove the pole guide from the seat back assembly as referenced in the procedure.

Seat cushion trim

  1. 1
    Remove the hog rings from the bottom of the seat cushion trim.
    Bottom view of the seat cushion trim/frame with serpentine springs and arrows marking hog ring locations around the perimeter. An enlarged inset shows pliers on a hog ring labeled HOG RING.
  2. 2
    Pull the seat cushion trim away from the padding and remove the remaining hog rings.
    Seat cushion trim shown pulled away from padding with hog ring positions marked by arrows. An enlarged inset shows pliers releasing a hog ring labeled HOG RING.
Support our work!

Search Manual

Search pages, specs, and procedures