Mazda MX-3 silhouetteMX-3

Molding — Liftgate Molding / Vertical Window Molding

S-25parts diagram

Liftgate Molding / Vertical Window Molding

Removal / Installation

  1. 1
    Remove in the order shown in the figure, referring to Removal note.
    Exploded view of the liftgate and rear window area showing the liftgate molding and vertical window molding installation. Numbered balloons: 1 liftgate lower trim (lower right), 2 rear spoiler / liftgate area, 3 liftgate molding (marked SST REPLACE, top), 4 vertical window molding (marked SST REPLACE, right). Two inset detail circles at upper corners show molding cross-sections. A tightening-torque callout '3.0-4.9 (30-50, 27-43) N·m (kgf·cm, in·lbf)' is shown at bottom.
  2. 2
    Install in the reverse order of removal, referring to Installation note.
3.0 - 4.9N·m
Parts DiagramFig. fig1
#Part NameNotes
1Liftgate lower trimRemoval / Installation ... page S-65
2Rear spoilerRemoval / Installation ... page S-32
3Liftgate moldingRemoval note ... page S-26; Installation note ... page S-26
4Vertical window moldingRemoval note ... page S-26; Installation note ... page S-28
Support our work!

See also

page S-65page S-32page S-26page S-28

Search Manual

Search pages, specs, and procedures