WINDSHIELD
S-44prose procedureWindshield Installation note (continued)
- 11Align the glass marks with the notches in the spacers and install the glass onto the body.
- 12Press firmly on the glass to compress the sealant. Verify that the body-to-glass clearance is as shown.
- 13Use a scraper to smooth away any sealant that oozes out. Add more sealant to any points of poor contact. Adjust the upper and side sealant as shown, if necessary.
- 14Install the windshield molding before the sealant hardens. (1) Align the marks on the molding to the roof inner line. (2) Install the top of the molding. (3) Install the corners of the molding. (4) Install the sides of the molding, starting from the top and then toward the bottom.
- 15To prevent the glass from being pushed out by air pressure if a door is closed, open all of the windows until the repair sealant has hardened.
- 16Check for water leaks. If a leak is found, wipe the water off well and reinstall the windshield.
Hardening time of repair sealant
Hardening time of repair sealant
5°C {41°F}
Surface hardening timeApprox. 1.5 hr
Time required until car can be put into service12 hr
20°C {68°F}
Surface hardening timeApprox. 1 hr
Time required until car can be put into service4 hr
35°C {95°F}
Surface hardening timeApprox. 10 min
Time required until car can be put into service2 hr