LIFTGATE
S-14prose procedureAdjustment
Liftgate
Adjust the liftgate laterally and vertically by loosening the liftgate-to-hinge mounting nuts shown in the figure.
| Specification | Value |
|---|---|
| Clearance ① | 4.5-7.5mm {0.18-0.29 in} |
| Clearance ② | -0.2-1.8mm {-0.01-0.07 in} |
| Clearance ③ | 2.5-5.5mm {0.10-0.22 in} |
| ≈177 - 284N·m |
Clearance ①
4.5-7.5mm {0.18-0.29 in}
Clearance ②
-0.2-1.8mm {-0.01-0.07 in}
Clearance ③
2.5-5.5mm {0.10-0.22 in}
177 - 284N·m
Liftgate lock
- 1Verify that the liftgate is properly aligned. (Refer above.)
- 2Remove the service cover from the trunk end trim.
- 3Loosen the liftgate lock mounting bolts, and align the lock with striker on the liftgate.
| Specification | Value |
|---|---|
| Liftgate lock mounting bolts | ≈157 - 216N·m |
Liftgate lock mounting bolts
157 - 216N·m