WINDSHIELD WIPER AND WASHER
S-37prose procedureInstallation note
Windshield wiper arm and blade
NOTE
Clean the wiper arm connector shafts with a wire brush before installing the wiper arms.
Adjustment
Windshield wiper arm and blade
Windshield wiper arm and blade adjustment
- 1Turn the ignition switch to ON and turn the wiper switch on to operate the wipers.
- 2Turn the wiper switch off to set the wipers in the park position.
- 3Set the wiper arm height as shown in the figure.
| Specification | Value |
|---|---|
| Tightening torque (wiper arm) | ≈96 - 134N·m |
| Wiper arm blade clearance | 30 ± 2mm (1.2 ± 0.08 in) |
Tightening torque (wiper arm)
96 - 134N·m
Wiper arm blade clearance
30 ± 2mm (1.2 ± 0.08 in)
Windshield washer nozzle
NOTE
Insert a needle or similar object into the nozzle hole and move the nozzle to adjust the spray direction.
Clearance mm (in)
1
Clearance mm (in)30 (1.2)
2
Clearance mm (in)40 (1.6)
3
Clearance mm (in)50 (2.0)
4
Clearance mm (in)55 (2.2)
5
Clearance mm (in)60 (2.4)
6
Clearance mm (in)75 (3.0)
7
Clearance mm (in)80 (3.1)
8
Clearance mm (in)90 (3.5)
9
Clearance mm (in)145 (5.71)
10
Clearance mm (in)160 (6.30)
11
Clearance mm (in)170 (6.69)
12
Clearance mm (in)200 (7.87)
13
Clearance mm (in)231 (9.09)
14
Clearance mm (in)249 (9.80)
15
Clearance mm (in)260 (10.2)
16
Clearance mm (in)336 (13.2)
17
Clearance mm (in)360 (14.2)