REAR WIPER AND WASHER
S-40prose procedureInstallation note
Rear wiper arm and blade
Clean the wiper arm connector shaft with a wire brush before installing the wiper arm.
Adjustment
Rear wiper arm and blade
Rear wiper arm and blade adjustment
- 1Set the motor shaft to the park position by turning the rear wiper switch on and off.
- 2Set the wiper arm height as shown in the figure.
| Specification | Value |
|---|---|
| {60—100 kgf·cm, 53—86.7 in·lbf} | 5.9-9.80N·m |
{60—100 kgf·cm, 53—86.7 in·lbf}
5.9-9.80N·m
Rear washer nozzle
Insert a needle or similar object into the nozzle hole and move the nozzle to adjust the spray direction.