Shift Mechanism — Overhaul
J2-54parts diagramManual transmission shift mechanism (M/T).
Overhaul
- 1Disassemble in the order shown in the figure.
- 2Inspect all parts and repair or replace as necessary.
- 3Assemble in the reverse order of disassembly, referring to Assembly Note.
Parts DiagramFig. fig1
NOTE
GASKET, REPLACE — gaskets at the indicated joints must be replaced. Apply grease at the marked points.
| Specification | Value |
|---|---|
| Joint bushing fastenercallout near 23 | 9.81—14.7N·m {100—150 kgf-cm, 86.8—130.2 in-lbf} |
| Bolt (8, 9) | 16—22N·m {1.6—5.3 kgf-m, 12—16 ft-lbf} |
| Nut (13) / lower mount | 38—51N·m {3.8—5.3 kgf-m, 28—38 ft-lbf} |
| Floor brace (1) | 94—127N·m {9.5—12.9 kgf-m, 69—93 ft-lbf} |
Joint bushing fastenercallout near 23
9.81—14.7N·m {100—150 kgf-cm, 86.8—130.2 in-lbf}
Bolt (8, 9)
16—22N·m {1.6—5.3 kgf-m, 12—16 ft-lbf}
Nut (13) / lower mount
38—51N·m {3.8—5.3 kgf-m, 28—38 ft-lbf}
Floor brace (1)
94—127N·m {9.5—12.9 kgf-m, 69—93 ft-lbf}