TRANSAXLE — Bearing preload verification (differential, primary, secondary)
J2-41prose procedureBearing preload verification specs differ per shaft: differential 1.4-1.9 N·m, primary 0.1-0.2 N·m, secondary 0.2-0.4 N·m
Bearing preload verification (continued)
- 3Install the SST to the differential.
- 4Connect a torque wrench to the SST and measure the preload.
- 5Remove the SST.
- 6With the transaxle facing in the direction shown in the figure, install the SST to the primary shaft gear assembly.
- 7Connect a torque wrench to the SST and measure the preload.
- 8Remove the SST, transaxle case, primary shaft gear assembly and differential.
- 9Install the secondary shaft gear assembly and transaxle case, and tighten to the specified torque.
- 10Install the SST to the secondary shaft gear assembly.
- 11Connect a torque wrench to the SST and measure the preload.
| Specification | Value |
|---|---|
| Preload (differential) | 1.4 - 1.9N·m |
| Preload (primary shaft) | 0.1 - 0.2N·m |
| Tightening torque (transaxle case) | 38 - 51N·m |
| Preload (secondary shaft) | 0.2 - 0.4N·m |
Preload (differential)
1.4 - 1.9N·m
Preload (primary shaft)
0.1 - 0.2N·m
Tightening torque (transaxle case)
38 - 51N·m
Preload (secondary shaft)
0.2 - 0.4N·m