Differential — Disassembly / Inspection / Assembly Notes
J2-52prose procedureDisassembly Note
Bearing (side opposite ring gear)
NOTE
The bearing does not need to be removed unless you are replacing it.
Remove the bearing by using the SSTs.
Bearing (ring gear side)
Remove the bearing by using the SST.
Inspection
Inspect all parts and repair or replace as necessary.
Ring gear and gear case assembly
Inspect the ring gear for wear and cracks. If the gear case is replaced, adjust the bearing preload.
Bearing
Inspect for wear and rough rotation. If the bearing is removed, then replace it and the bearing race together, and adjust the bearing preload.
Assembly Note
Bearing (ring gear side)
Install the new bearing by using the SST.