Assembly Note - Clutch hub

J2-31spec table

Manual transaxle (M/T) secondary shaft assembly note. Synchronizer key dimensions differ between 1st/2nd and 3rd/4th & 5th/Rev. positions.

Assembly Note

Position	1	2	3
1st/2nd	19.0 {0.748}	4.25 {0.167}	5.0 {0.197}
3rd/4th 5th/Rev.	17.0 {0.669}	4.25 {0.167}	5.0 {0.197}

1st/2nd

119.0 {0.748}

24.25 {0.167}

35.0 {0.197}

3rd/4th 5th/Rev.

117.0 {0.669}

24.25 {0.167}

35.0 {0.197}

Install the synchronizer keys and springs in the clutch hub.

Install the new bearing by using the SST.

NOTE

The 2nd synchronizer ring has teeth missing at three places around its outer edge to help distinguish it from the other synchronizer rings.

1
Assemble the 1st gear, 1st synchronizer ring, and 1st/2nd clutch hub assembly, as shown in the figure.
2
Align the synchronizer ring grooves and synchronizer keys.