TRANSAXLE — Disassembly Note: Oil seals, Bearing race & Roll pin

J2-20prose procedure

Manual transaxle (M/T) clutch housing disassembly notes.

Disassembly note

Oil seal (primary shaft)

CAUTION

The clutch housing is made of aluminum, and is therefore easily dented and scratched by metal tools. When removing the oil seal, keep contact with the clutch housing to a minimum.

Remove the oil seal from the clutch housing as shown in the figure.

Bearing race (secondary shaft)

Remove the bearing race by lifting it and the funnel out together.

Roll pin

To remove the clutch housing pin, align the groove with the roll pin, then tap the pin out by using a pin punch.

Oil seal (change rod assembly)

Remove the oil seal.

Oil seal (differential)