Assembly - Secondary Shaft Assembly
J2-30parts diagramManual transaxle (M/T) secondary shaft assembly.
Precaution
- 1Replace all O-rings and gaskets with the new ones included in the overhaul kit.
- 2Verify that all parts are completely clean before assembly.
- 3Assemble parts within 10 minutes after applying sealant. Allow all sealant to cure for at least 30 minutes after assembly before filling the transaxle with transaxle oil.
- 4Replace bearing races and bearings as sets.
Secondary Shaft Assembly
Assemble in the order shown in the figure, referring to Assembly Note.
Parts DiagramFig. fig1
