Engine Speed Sensing Power Steering — Oil Pump Assembly Notes (K8 DOHC)
N-50prose procedureK8 DOHC engine specific power steering oil pump.
Assembly Note
Rotor
NOTE
Install the rotor to the shaft with the rotor identification mark upward.
Cam ring
NOTE
Install the cam ring with its identification mark downward.
Vane
NOTE
Install the vanes (10 pieces) to the rotor, with the radiused part of the vanes outward.
Pump body (rear)
Pump body (rear) assembly
- 1Install the rear pump body.
- 2Turn the pump shaft by hand, and verify that it turns smoothly.
Pulley
NOTE
Install the pulley locknut while holding the pulley by using a screwdriver.
| Specification | Value |
|---|---|
| Tightening torque (pulley locknut) | ≈490 - 569N·m |
Tightening torque (pulley locknut)
490 - 569N·m