MX-3 Service ManualMX-3

Torque Specs Tools Parts Diagrams

ENGINE SPEED SENSING POWER STEERING — Disassembly Note

N-33prose procedure

Continued from N-32

Support yoke

Remove the support yoke with a snap ring plier.

Snap ring

Remove the snap ring with a snap ring plier.

Housing cover

CAUTION

If the drill diameter and/or the depth of the recess are excessive, the threads will be too loose when the plug is reused.

Housing cover

1
Use a drill (Φ1.5mm {0.06 in}) to make a recessed area (approx. 1.5mm {0.06 in}) at the punch-crimped part of the threaded part.
2
Remove the housing cover.

Pinion shaft assembly

1
Remove the locknut.
2
Set the gear housing assembly on a press and remove the pinion shaft assembly as shown in the figure.

Rack bushing

1
Cut away the staked areas with a drill.
2
Remove the rack bushing.

Support our work!