Mazda MX-3 silhouetteMX-3

ENGINE SPEED SENSING POWER STEERING — Disassembly Note

N-32prose procedure
Continued from N-31

Disassembly Note

Oil pipe

Oil pipe

  1. 1
    Secure the gear and linkage in a vise.
    Gear and linkage secured in a vise; hand removing the oil pipe.
  2. 2
    Mark the pipe clip and the gear housing for proper assembly.
    Close-up of the oil pipe clip on the gear housing with a paint MARK applied to the pipe clip and gear housing for proper reassembly.
  3. 3
    Remove the oil pipe.

Tie-rod end

  1. 1
    Before removing the tie-rod end, make a mark for proper installation.
    Tie-rod end with a mark made for proper installation before removal.
  2. 2
    Remove the tie-rod end.

Tie rod

  1. 1
    Secure the rack in a vise.
    Rack secured in a vise; tie rod being removed.
  2. 2
    Remove the tie rod.

Adjusting cover

  1. 1
    Remove the locknut from the adjusting cover.
    Removing the adjusting cover using SST 49 H032 321A.
  2. 2
    Remove the adjusting cover with the SST.
  3. 3
    Remove the yoke spring.
Support our work!

Search Manual

Search pages, specs, and procedures