ENGINE SPEED SENSING POWER STEERING — Steering Gear Disassembly Note (Oil pipe, Tie rod, Locknut, Housing cover, Plug)
N-23prose procedureDisassembly Note
Oil pipe
After disconnecting the pipes, use a plug or adhesive type tape to seal each port to prevent the entry of foreign materials.
Tie rod
Use the SST to remove the tie rod.
Locknut
Use the SST to remove the locknut.
Housing cover
CAUTION
If the drill diameter and/or the depth of the recess are excessive, the threads will be too loose when the plug reused.
Use a drill (Φ1.5mm {0.06 in}) to make a recessed area (approx. 1.5mm {0.06 in}) at the punch-crimped part of the threaded part.
Plug
Use the SST to remove the plug.