REAR AXLE, DRIVE SHAFT

M-17prose procedure

Disassembly Note

NOTE

The ABS sensor rotor does not have to be removed unless you are replacing it.

Remove the ABS sensor rotor with a chisel.

NOTE

The wheel hub and bearing are one assembly and do not to be disassembled.

Remove the hub bolts with a press.

Press in new hub bolts.

1
Install a new rear ABS sensor rotor on to the wheel hub.
2
Using a steel plate and the SST, press the ABS sensor rotor until it is flush with the wheel hub.
The ABS sensor rotor can be installed in either direction.

Part Number	Name	Usage
49 H034 2A0	Lower arm bushing puller & installer	For support of bracket
49 H034 201	Support block (Part of 49 H034 2A0)	For support of bracket

49 H034 2A0

NameLower arm bushing puller & installer

UsageFor support of bracket

49 H034 201

NameSupport block (Part of 49 H034 2A0)

UsageFor support of bracket