Clutch Release Collar, Pilot Bearing, Flywheel

H-20prose procedure

Inspection

CAUTION

Cleaning the clutch release collar with cleaning fluids or a steam cleaner can wash the grease out of the sealed bearing.

NOTE

The pilot bearing can be inspected while it is in the flywheel.

Turn the bearing while applying force in the axial direction. If the bearing sticks or has excessive resistance, replace it.

1
Inspect the contact surface of the clutch disc for scoring, cracks and burning. Remove minor scoring or burning with emery paper. Repair or replace as necessary.
2
Inspect the ring gear teeth for wear and damage. If necessary, replace the ring gear.
3
Measure the flywheel runout with a dial indicator. Replace the flywheel if runout is excessive.
Runout: 0.2 mm {0.008 in} max.

Specification	Value
Flywheel runoutmax.	0.2mm {0.008 in}

Flywheel runoutmax.

0.2mm {0.008 in}