Clutch Master Cylinder
H-12prose procedurePiston and secondary cup assembly
WARNING
Applying compressed air to the cylinder assembly can make the contents suddenly pop out, possibly causing injury. Hold a rag over the cylinder opening when using compressed air.
Remove the piston and secondary cup assembly, spacer, and primary cup by applying compressed air through the clutch pipe installation hole.
Assembly Note
Piston and secondary cup assembly
- 1Apply new fluid of the specified type to the cylinder bore and all internal parts.
- 2Verify that all parts are completely free of dirt, dust, and other small particles.
- 3Install the spring, primary cup, spacer, and piston and secondary cup assembly into the master cylinder body.
Snap ring
While holding the piston down with a cloth-wrapped pin punch, install the snap ring.