CLUTCH MASTER CYLINDER
H-10prose procedureAir Bleeding (continued)
- 6Modify the bleeder screw tightening torque to allow for a torque wrench-SST combination. (Refer to section GI "Torque Formulas".)
- 7Tighten the bleeder screw by using the SST.Tightening torque: 5.9—8.8 N·m {60—90 kgf·cm, 52—78 in·lbf}
- 8Fill the reservoir to MAX with new fluid of the specified type.
- 9Slowly pump the clutch pedal several times. Verify that there is no fluid leakage.
- 10Check operation of the clutch system.
- 11Check operation of the brake system.
| Specification | Value |
|---|---|
| Bleeder screw | ≈58 - 86N·m |
Bleeder screw
58 - 86N·m