TECHNICAL DATA — F2. FUEL AND EMISSION CONTROL SYSTEMS (K8)

TD-14spec table

K8 DOHC (1.8L V6) fuel and emission control specs. Ignition timing label printed as 'BDTC' on the page (typically BTDC).

Continued from TD-13

F2. FUEL AND EMISSION CONTROL SYSTEMS (K8)

Fuel and emission control systems — K8 DOHC

Item	Sub-item	Detail	K8 DOHC
Idle speed* rpm			640–700 {670 ± 30}
Ignition timing* BDTC			9–11° {10 ± 1°}
Throttle body — Type			Horizontal draft
Throttle body — Throat diameter mm {in}			55 {2.2}
Fuel pump — Type			Impeller (in-tank)
Fuel pump — Maximum output pressure kPa {kgf/cm², psi}			637 {6.5, 92}
Fuel filter — Type	Low-pressure side		Nylon element (in fuel pump)
Fuel filter — Type	High-pressure side		Paper element
Pressure regulator — Type			Diaphragm
Pressure regulator — Regulating pressure kPa {kgf/cm², psi}			284 {2.9, 42}
Fuel injector — Type			High-ohmic, side-feed
Fuel injector — Type of drive			Voltage
Fuel injector — Resistance Ω			Approx. 13.8 (at 20°C {68°F})
Idle air control valve — Solenoid resistance Ω			10.7–12.3 (at 20°C {68°F})
Purge solenoid valve — Solenoid resistance Ω			23–27 (at 20°C {68°F})
Camshaft position sensor (SGC, SGT signal) — Type			Hall element
Volume airflow sensor — Type			Measuring core type
Volume airflow sensor — Resistance Ω	E2⇔Vs	Closed throttle position (at 20°C {68°F})	200–1,000
Volume airflow sensor — Resistance Ω	E2⇔Vs	Wide open throttle (at 20°C {68°F})	20–800
Volume airflow sensor — Resistance Ω	E2⇔Vc		200–400
Volume airflow sensor — Resistance Ω	E2⇔THA (intake air temperature sensor)	20°C {68°F}	2,000–3,000
Volume airflow sensor — Resistance Ω	E2⇔THA (intake air temperature sensor)	60°C {140°F}	400–700
Engine coolant temperature sensor — Resistance kΩ	20°C {68°F}		2.2–2.7
Engine coolant temperature sensor — Resistance kΩ	80°C {176°F}		0.26–0.35

Idle speed* rpm

Sub-item

Detail

K8 DOHC640–700 {670 ± 30}

Ignition timing* BDTC

Sub-item

Detail

K8 DOHC9–11° {10 ± 1°}

Throttle body — Type

Sub-item

Detail

K8 DOHCHorizontal draft

Throttle body — Throat diameter mm {in}

Sub-item

Detail

K8 DOHC55 {2.2}

Fuel pump — Type

Sub-item

Detail

K8 DOHCImpeller (in-tank)

Fuel pump — Maximum output pressure kPa {kgf/cm², psi}

Sub-item

Detail

K8 DOHC637 {6.5, 92}

Fuel filter — Type

Sub-itemLow-pressure side

Detail

K8 DOHCNylon element (in fuel pump)

Fuel filter — Type

Sub-itemHigh-pressure side

Detail

K8 DOHCPaper element

Pressure regulator — Type

Sub-item

Detail

K8 DOHCDiaphragm

Pressure regulator — Regulating pressure kPa {kgf/cm², psi}

Sub-item

Detail

K8 DOHC284 {2.9, 42}

Fuel injector — Type

Sub-item

Detail

K8 DOHCHigh-ohmic, side-feed

Fuel injector — Type of drive

Sub-item

Detail

K8 DOHCVoltage

Fuel injector — Resistance Ω

Sub-item

Detail

K8 DOHCApprox. 13.8 (at 20°C {68°F})

Idle air control valve — Solenoid resistance Ω

Sub-item

Detail

K8 DOHC10.7–12.3 (at 20°C {68°F})

Purge solenoid valve — Solenoid resistance Ω

Sub-item

Detail

K8 DOHC23–27 (at 20°C {68°F})

Camshaft position sensor (SGC, SGT signal) — Type

Sub-item

Detail

K8 DOHCHall element

Volume airflow sensor — Type

Sub-item

Detail

K8 DOHCMeasuring core type