TECHNICAL DATA — F1. FUEL AND EMISSION CONTROL SYSTEMS (B6)
TD-13spec tableB6 DOHC (1.6L I4) fuel and emission control specs; MTX vs ATX idle speed distinction.
F1. FUEL AND EMISSION CONTROL SYSTEMS (B6)
Fuel and emission control systems — B6 DOHC
Idle speed* rpm
Sub-item
B6 DOHC650–750 (700 ± 50)[MTX] 700–800 (750 ± 50)[ATX]
Ignition timing* BTDC
Sub-item
B6 DOHC9–11°(10 ± 1°)
Throttle body — Type
Sub-item
B6 DOHCHorizontal draft
Throttle body — Throat diameter mm {in}
Sub-item
B6 DOHC55 {2.2}
Fuel pump — Type
Sub-item
B6 DOHCImpeller (in-tank)
Fuel pump — Output pressure kPa {kgf/cm², psi}
Sub-item
B6 DOHC441–589 {4.5–6.0, 64–85}
Fuel filter — Type
Sub-itemLow-pressure side
B6 DOHCNylon element (in fuel pump)
Fuel filter — Type
Sub-itemHigh-pressure side
B6 DOHCPaper element
Pressure regulator — Type
Sub-item
B6 DOHCDiaphragm (Two stage type)
Pressure regulator — Regulating pressure kPa {kgf/cm², psi}
Sub-item
B6 DOHC284 {2.90, 41}
Fuel injector — Type
Sub-item
B6 DOHCHigh-ohmic, top-feeding
Fuel injector — Type of drive
Sub-item
B6 DOHCVoltage
Fuel injector — Resistance Ω
Sub-item
B6 DOHCApprox. 13.8 (at 20°C {68°F})
Idle air control valve — Solenoid resistance Ω
Sub-item
B6 DOHC10.7–12.3 (at 20°C {68°F})
Purge solenoid valve — Solenoid resistance Ω
Sub-item
B6 DOHC23–27 (at 20°C {68°F})
Camshaft position sensor — Type
Sub-item
B6 DOHCHall effect
Mass airflow sensor — Type
Sub-item
B6 DOHCHot wire type
Engine coolant temperature sensor — Resistance kΩ
Sub-item20°C {68°F}
B6 DOHC2.21–2.69
Engine coolant temperature sensor — Resistance kΩ
Sub-item80°C {176°F}
B6 DOHC0.287–0.349
Fuel tank — Capacity L {US gal, Imp gal}
Sub-item
B6 DOHC50 {13.2, 11.0}
Air cleaner element — Element type
Sub-item
B6 DOHCOil permeated
Accelerator cable — Free play mm {in}
Sub-item
B6 DOHC1–3 {0.039–0.118}
Fuel — Specification
Sub-item
B6 DOHCUnleaded --(R+M)/2 method 87 or higher
NOTE
* With System Selector (49 B019 9A0) test switch at "SELF TEST" or TEN terminal of data link connector grounded.