Mazda MX-3 silhouetteMX-3

OIL PUMP

D2-11parts diagram
Continued from D2-10

PREPARATION

SST

49 H010 401
NameInstaller, oil seal
UsageFor installation of front oil seal

Disassembly / Assembly

  1. 1
    Disassemble in the order shown in the figure, referring to Disassembly Note.
    Exploded view of the oil pump assembly with numbered balloon callouts 1-9. Shows the oil seal (1, marked SST/REPLACE), pump cover (2), outer rotor (3), inner rotor (4), blind plug (5), spring seat (6, REPLACE), pressure spring (7), control plunger (8), and pump body (9). 'OIL' apply-oil symbols mark several mating surfaces. Tightening torque callouts: pump cover bolts 5.9-8.8 N·m {60-90 kgf·cm, 53-78 in·lbf}; blind plug 57-69 {5.8-7.0, 42-50} N·m {kgf·m, ft·lbf}.
  2. 2
    Assemble in the reverse order of disassembly, referring to Assembly Note.
Parts DiagramFig. fig2
#Part NameNotes
1Oil sealDisassembly Note .......... page D2-12; Assembly Note .......... page D2-13
2Pump coverDisassembly Note .......... page D2-12; Assembly Note .......... page D2-13
3Outer rotorInspection .......... page D2-12; Assembly Note .......... page D2-13
4Inner rotorInspection .......... page D2-12; Assembly Note .......... page D2-13
5Blind plug—
6Spring seat—
7Pressure springInspection .......... page D2-12
8Control plunger—
9Pump body—
Support our work!

See also

page D2-12page D2-13

Search Manual

Search pages, specs, and procedures